Repeaters

RTX 4022 - Connect with Yealink

Ensure the RTX Repeater is powered off.
Turn on the Yealink base station and connect your handset.
On the handset press OK → Settings → 8. System Settings → Repeater Mode and press 'Change'.
A message will be displayed saying 'Setting takes effect after base reboot. Reboot now or not?' - press 'Yes'.
The base station should reboot, if not, manually restart the base station.
Once rebooted, press and hold the wireless button on the front of the base station for 2 seconds to enter 'Pairing Mode' (the handset icon on the base will flash green).
While the handset icon is flashing, power on the repeater. The light on the repeater should flash red and then go solid green.

Power off the RTX Repeater.
Power on the RTX Repeater for between 1-5 secs, then power off.
Power on RTX Repeater for between 25-35 secs, then power off.
Now the RTX Repeater should be reset, power it back on and the light should be blinking slowly.

Ensure the Yealink Repeater is powered off.
Turn on the Yealink base station and connect your handset.
On the handset press OK → Settings → 8. System Settings → Repeater Mode and press 'Change'.
A message will be displayed saying 'Setting takes effect after base reboot. Reboot now or not?' - press 'Yes'.
The base station should reboot, if not, manually restart the base station.
Once rebooted, press and hold the wireless button on the front of the base station for 2 seconds to enter 'Pairing Mode' (the handset icon on the base will flash green).
While the handset icon is flashing, power on the repeater. The DECT light on the repeater should flash green and then go solid green.

Long press the reset key on the repeater.
The DECT LED will slowly flash red to denote the de-registering has been successful.